Em lock striker

What is a strike in a lock?

Definition of lock strike : a metal fastening on a doorframe into which the bolt of a lock is projected to secure the door.

Can Maglocks be fail secure?

Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage. … They should be used on doors where entry security is a concern since they will remain locked during a power outage.

What is the difference between electric strike and magnetic lock?

The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.

How does an electromagnetic lock work?

Electromagnetic locks consist of an armature and a coil assembly, which become magnetized when an electric current passes through them. This magnetic field secures the door and electronically controls when doors are locked and unlocked. Electromagnetic locks are fail-safe by design.

What is a cathode lock?

The cathode lock is the accessory product of the access control system. It is installed on the doorframe and used for locking the mechanical lock tongue. At present, FC series of cathode locks can be widely used in office buildings, wooden doors, stainless steel doors, fire doors, residential entrance doors.

What does a door latch go into?

The latch bore, also known as the edge bore, is the hole drilled from the side of the door into the cross bore to allow the latch of the lock to be installed and to accommodate the sliding of the deadbolt. The diameter of the latch bore is generally 1” to accommodate bolts from either mechanical or electronic locksets.May 20, 2019

Are electromagnetic locks safe?

This type of lock has a cylinder, similar to those found in conventional locks. The cylinder makes it possible for the lock to remain secure, even if the power supply is cut off. Electromagnetic locks are usually fail-safe and must satisfy applicable fire regulations so as to be safe in emergency situations.